Everything we have, one page

Eighteen things, sorted the way a rank is sorted

Longest first, then timber, then metal by the sheet, then the tools. Every price is what you pay, Dutch VAT in. Everything on this page is available to order: if we list it, we can cut it or make it.

  • Speaking lengthHow much pipe is actually sounding, measured from the mouth up. It is not the pipe's full height.
  • Tin contentHalf tin is bright and dear. Thirty per cent is warmer and cheaper. We pour both every month.
  • Lead timesSheet and timber go out in a week. A voiced pipe takes four to six, because it waits for the bench.

Eighteen things on the bench

Rows of polished metal organ pipes, each with a mouth cut into its front, standing in a pale case.

Prestant rank

Prestant C, 8 foot

€615

Open flue pipe · 2.44 m speaking length · spotted metal, half tin

A close rank of tall metal pipes with their mouths cut in one straight line near the feet.

Prestant rank

Prestant c, 4 foot

€352

Open flue pipe · 1.22 m speaking length · spotted metal, half tin

Pale cream pipes seen from below, their rounded fronts running up out of the frame.

Prestant rank

Prestant c1, 2 foot

€214

Open flue pipe · 61 cm speaking length · spotted metal, half tin

Slim gilded pipes standing in a row on a carved wooden rail.

Prestant rank

Prestant c2, 1 foot

€139

Open flue pipe · 30.5 cm speaking length · spotted metal, half tin

Open-topped grey metal pipes of different heights standing side by side.

Prestant rank

Open Fluit c, 4 foot

€298

Open flue pipe, wide scale · 1.22 m speaking length · thirty per cent tin

The sawn end of a log, its growth rings circling a split that runs to the middle.

Timber and stock

Quartered oak, pipe stock

€96

Air dried eight years · 1.5 m × 180 mm × 26 mm · for stopped bodies

A planed pale board with a fine straight grain running the length of it.

Timber and stock

Baltic pine, pipe stock

€54

Air dried six years · 1.8 m × 150 mm × 22 mm · for open wooden bodies

The sawn edges of stacked boards, pale and faintly ribbed where the blade passed.

Timber and stock

Pear, block stock

€72

Kiln dried · 400 mm × 120 mm × 60 mm · for stoppers, caps and blocks

Stacks of sawn boards resting on steel racks under a corrugated roof.

Timber and stock

Boards cut to your list

€38

Any board on the rack, cut square and planed one face · by the metre

Weathered boards lying side by side, one of them still carrying a band of orange paint.

Timber and stock

Reclaimed oak, case stock

€64

Lifted from a 1931 loft floor · 1.2 m × 160 mm × 24 mm · nails pulled

A pale metal sheet mottled all over in fine light and dark patches.

Pipe metal

Spotted metal sheet, half tin

€188

Cast on sand and planed · 1000 × 500 mm · 1.6 mm

A grey metal plate marked with scratches and small bright flecks.

Pipe metal

Thirty tin sheet

€126

Cast on sand and planed · 1000 × 500 mm · 1.6 mm

A fan of thin metal strips curled round into a cone.

Pipe metal

Offcut metal, by the kilo

€19

Clean sheet ends sorted by tin content · minimum two kilos

Three slim metal rods standing upright against a pale ground.

Pipe metal

Solder rod, lead and tin

€23

Six rods, 8 mm · drawn here for seams and foot joints

A stack of ridged metal cones nested one inside another on a white ground.

Bench tools

Tuning cones, set of four

€164

Cast pewter · 40, 60, 85 and 120 mm across the base

One ridged metal cone lying on its side on a white ground.

Bench tools

Tuning cone, single

€52

Cast pewter · 85 mm across the base · 210 g

A row of wooden-handled bench tools hanging in order on a rack.

Bench tools

Bench scrapers, set of eight

€138

Ground steel, ash handles · for languid and mouth work

A pair of brass dividers standing point down on a pale surface.

Bench tools

Brass dividers

€74

Solid brass, 200 mm · for stepping out a mouth width

Nothing on the bench answers to that. Try a shorter word, or write and ask.

Reading the list

Why the four Prestants are not evenly spaced in price

Length halves every octave, so the eight foot C uses twice the metal of the four foot and eight times the metal of the one foot. Metal is the cheap part. The mouth is cut, the languid set and the pipe voiced by hand whatever its size, and a small pipe is fiddlier than a big one, so the bench hours barely move.

That is why the price curve flattens as the pipes get short, and why a one foot pipe is never an eighth of an eight foot pipe.

  • 8 foot
    2.44 m · €615
  • 4 foot
    1.22 m · €352
  • 2 foot
    61 cm · €214
  • 1 foot
    30.5 cm · €139

Not on the page? It is probably still possible

We cut one-offs every week: an odd scale, a sharp that went missing in 1890, a wooden body in a timber nobody stocks. Send whatever measurements you already have. Back comes a figure and a finishing date, and neither side is committed by that.